ALKM
Round Anemostat diffuser
ALKM - The finned Anemostat end HVAC element for air distribution. The outflow face of the anemostat is made of fixed profile blades, whose circular design guarantees even streaming of air in all directions.
Properties
•Installed into ceiling or suspended below ceiling
•For offices, cinemas, restaurants, shopping centers, etc.
•Airflow volume from 110 to 1 800 m3/h
•Diameter in mm: 250, 300, 400, 500, 600
•Installation height from 2,6 to 4,0 m
•For cooling
•Supplied air is separated equally in all directions
•Galvanized plenum box
•Front panel coated according RAL
Specifications
Anemostat is a terminal, air-handling element for distribution of air. It is suitable to be built-in to the ceiling in rooms with the ceiling height of approximately 2.6 - 4 m, for the purpose of inlet and outlet of air. The outlet areas of anemostats are formed by rigid profiled vanes and their round construction allows for the inlet air to be spread evenly to all directions. The effective outlet speed wef shall in no case be less than 2 m.s-1. If the speed is lower the air stream is torn off the ceiling. Anemostats are intended for environment protected against weather impacts with the classification of climatic conditions class 3K5, without condensation, frost, ice formation and without water even from other sources than rain according to EN 60 72133, change A2. Air flow must have a temperature between -20°C to +70°C. Anemostats are suitable for systems without abrasive, chemical and adhesive particles.